The 6.5 kW off-grid inverter occupies a bridging power segment between residential off-grid and small commercial use. Unlike 3–5 kW models, which tend to fall short when driving air conditioners and water pumps, and unlike models above 10 kW, which sharply increase the investment required for battery banks and PV arrays, its core value lies in covering most of the electricity demand of a household or small production unit with a single unit while balancing the battery voltage platform (usually 48 V), PV oversizing capability, and surge-load withstand.
Basic Operating Principle: Controlled DC-to-AC Conversion and Energy Priority Management
The fundamental task of an off-grid inverter is to convert DC power (from batteries or PV) into AC power usable by loads. 6.5 kW models generally use SPWM (sinusoidal pulse-width modulation) technology: a high-frequency triangular carrier is compared with a sinusoidal reference wave to generate switching pulses whose widths vary sinusoidally, driving power devices (MOSFETs or IGBTs), followed by filtering to obtain a pure sine-wave AC output. Output waveform quality typically requires THD <3% under linear loads and THD <5% under nonlinear loads.
Unlike pure inverters, current mainstream 6.5 kW models are almost all hybrid/charger inverters with built-in MPPT solar charge controllers and AC chargers, and they feature programmable energy priority management: solar priority, grid/generator priority, or battery priority can be set, with automatic scheduling among multiple input sources. When the AC input (grid or generator) fails, the typical transfer time to off-grid/battery mode is 10 ms, which can ensure uninterrupted operation of sensitive equipment such as computers.
Core Advantages
| Advantage Area | Basis in the Specifications and Explanation |
|---|---|
| Power class suited to medium continuous loads | Rated output 6.5kW, surge power 13kVA, pure sine wave output. Suitable for mixed loads such as air conditioners, refrigerators, water pumps, lighting, and power tools. It is not merely a small backup unit. |
| Strong PV charging capability | Built-in 120A solar charger, MPPT operating range 60–450V, max PV open-circuit voltage 520V, max PV input current 28A, max PV input power 9000W. The wide PV voltage range facilitates string design and suits installations where the PV array is some distance from the inverter. |
| AC charging and generator complementarity | Max AC charge current 120A, max PV + AC charge current 120A; supports Generator ATS Control. During cloudy or rainy days or in winter when PV output is insufficient, a diesel or gasoline generator can supplement charging. Suitable for weak-grid and long-duration off-grid projects. |
| Dual AC output for load branching | The specifications explicitly support Dual AC Output, making load partitioning, branch power supply, and system distribution design easier than with a single AC output. Better suited to residential and small commercial distribution box solutions. |
| Meter/CT and feed-in scenarios | Supports Meter/CT Connection and Feed-in to Grid. In regions where grid feed-in is permitted, it can be used for hybrid on/off-grid systems, metering and monitoring, and feed-in system design. The specific grid-tie function must be confirmed against local regulations, certifications, and parameter settings. |
| Good battery compatibility | 48V battery system, compatible with lithium and lead-acid batteries, supports lithium battery activation; float charge voltage 54V, overcharge protection 61V. Suitable for different BMS and battery pack solutions. |
| Parallel expansion capability depends on model | FY-APS6500 PRO-48 supports parallel operation; the standard version FY-APS6500-48 does not support parallel operation. For expansion projects, the PRO model should be selected first to avoid being unable to parallel units later. |
| Relatively complete monitoring and communication interfaces | Supports RS485 / CAN / RS232 / CT optional; monitoring supports WiFi (optional/built-in/external) and 4G optional, facilitating remote monitoring, energy management, and after-sales O&M. |
| Installation and environmental adaptability | Ingress protection IP43, net weight 10.7kg, dimensions 514×338×136.5mm, operating temperature -10°C to 50°C, max operating altitude 4000m with derating above 1000m; warranty 2 years. Suitable for indoor or sheltered installation. |
| Transfer and overload capability | Transfer time approximately 10ms, output frequency 50/60Hz adaptive; battery-mode overload capability per the specifications: 10 minutes at 102%–120% load, 1 minute at 120%–150% load, with short-time withstand at higher overloads. Suitable for motor starting and short-duration impact loads. |
Application Directions

Primary off-grid power supply for homes without grid access or with weak grid access
Suitable for villas, farmhouses, remote residences, pastoral housing, and similar scenarios, powering mixed loads such as air conditioners, refrigerators, lighting, water pumps, TVs, and small kitchen appliances. The 6.5kW single-phase off-grid inverter's 6.5kW continuous output and 13kVA surge power make it more suitable than 3–5kW models for households with multiple loads running simultaneously.
Small agriculture and workshops
Suitable for small farms, irrigation pumps, agricultural machinery repair shops, woodworking/metalworking workshops, etc. Such scenarios often involve single-phase motors, water pumps, power tools, and other inductive loads, where pure sine wave output and short-time overload capability are critical. With generator ATS control, power can be automatically supplemented when PV output is insufficient.


Light commercial off-grid and backup power
Suitable for remote shops, clinics, small guesthouses, small communication/surveillance sites, cold storage auxiliary power, etc. Dual AC output facilitates branch distribution, while Meter/CT and WiFi/4G monitoring facilitate energy consumption monitoring and remote O&M.
PV + storage + generator microgrid
The specifications support Generator ATS Control, 120A AC charging, and 120A PV + AC combined charging, making it suitable for off-grid microgrids based primarily on PV, with battery storage and generator backup. For areas with prolonged rainy periods or insufficient winter PV, generator complementarity is more economical than simply increasing battery capacity.


Grid-tied/off-grid hybrid projects requiring metering/CT/feed-in
Supports Meter/CT Connection and Feed-in to Grid, and can be used in hybrid systems requiring metering, monitoring, and feed-in control. For such projects, local grid-connection policies, certification requirements, and utility access conditions must be confirmed in advance.
Expandable distributed projects
If the project may be expanded later, the FY-APS6500 PRO-48 should be selected because it supports parallel operation; the standard version does not. The PRO version is better suited to distributed off-grid sites, phased construction projects, and multi-unit expansion solutions.

Our Certificate




Regarding us

FY Solar - Full-Spectrum Solar & Energy Storage Partner | 10+ Years Factory Direct
Company Overview FY Solar is a vertically integrated solar energy and energy storage manufacturer with over 10 years of industry expertise. We own production lines for lithium batteries and solar panels under our proprietary brand, and serve as authorized distributors for select international brands - giving buyers access to the full solar value chain from a single, trusted source.
We specialize in serving distributors, wholesalers, solar installers, and EPC contractors who need competitive pricing, reliable supply, and professional technical support.
Manufacturing & Own Brand Two core product lines are manufactured in-house under our own brand:
Lithium Batteries: LiFePO4 chemistry, residential and commercial battery packs, scalable modular design for home, C&I, and off-grid applications. MOQ: 1 unit - the lowest barrier to entry for distributors testing new markets.
Solar Panels: Monocrystalline and bifacial modules, 100W–700W+. MOQ: 1 pallet (~20–31 panels depending on wattage) - ideal for small distributors and project-based procurement.
Factory-direct supply means: no middleman markup, direct quality control, and full OEM/ODM customization capability.
Global Exhibitions

Hot Tags: 6.5 kw off-grid inverters, China 6.5 kw off-grid inverters manufacturers, suppliers, factory, Off Grid Single Phase Solar Inverter, off grid solar inverter, Off Grid Split Phase Solar Inverter, solar inverter, solar inverter system, string solar inverter
