12kw Single-phase Hybrid Inverter

Send Inquiry
12kw Single-phase Hybrid Inverter
Details
The single-phase hybrid inverter serves as the "solar-storage-fossil fuel-grid" energy hub in single-phase residential and small commercial settings. Its core value lies in integrating photovoltaic power, batteries, the grid, and generators to achieve self-generation, energy storage for backup, and flexible power supply.
Category
Hybrid Solar Inverter
Share to
Description
 
 

Product Introduction

 

 

The FY-6KHB-D1/LV (6K) and FY-12KHB-T1/LV (12K) are single-phase low-voltage 48V hybrid inverters for residential and small commercial energy storage. They support multiple energy inputs, including PV, battery, grid, generator, smart load, and AC coupling. Both models provide single-phase 220/230/240V, L+N+PE output, support 50/60Hz, and are compatible with lithium-ion and lead-acid batteries with a battery voltage range of 40–60V.

 

 

Main electrical features

 

Parameter 6KW (FY-6KHB-D1/LV) 12KW (FY-12KHB-T1/LV)
Max. PV Access Power Not specified (Selling point states up to 12kW PV input) 24,000W
Max. PV Usable Power 12,000W (200% oversizing) 19,200W (200% PV oversizing/160% usable)
Max. PV Input Voltage 550V 500V
Start-up Voltage 90V 90V
MPPT Voltage Range 70V - 450V 70V - 450V
No. of MPPT Trackers 2 3
No. of Strings per MPPT 1 / 1 2 / 2 / 2 (Total 6 strings)
Max. Input Current per MPPT 20A / 20A 2*20A / 2*20A / 2*20A (i.e., 20A per string)
Max. Short Circuit Current per MPPT 25A / 25A 2*25A / 2*25A / 2*25A

III. Battery (BAT) Parameters

Parameter 6KW 12KW
Battery Type Lithium-ion / Lead-acid Lithium-ion / Lead-acid
Nominal Battery Voltage 48V 48V
Battery Voltage Range 40V - 60V 40V - 60V
Max. Charge/Discharge Current 140A / 140A 250A / 250A
Max. Charge/Discharge Power 6,600W / 6,600W Not specified (estimated approx. 12kW based on voltage and current)

IV. Grid / AC Input & Output Parameters

Parameter 6KW 12KW
Nominal AC Output Power 6,000W 12,000W
Max. AC Output Apparent Power 6,600VA 13,200VA
Nominal AC Output Current 27.3A / 26.1A / 25.0A 54.5A / 52.2A / 50.0A
Max. AC Output Current 41A 60A
Max. Grid Passthrough Current (grid to load) 41A (misaligned in table, based on selling point) 68.2A
Nominal Voltage 220V/230V/240V, L+N+PE 220V/230V/240V, L+N+PE
Nominal Frequency 50Hz / 60Hz 50Hz / 60Hz
Power Factor > 0.99 @ rated power (Adjustable 0.8 LD - 0.8 LG) > 0.99 @ rated power (Adjustable 0.8 LD - 0.8 LG)
THDI < 3% @ R Load < 3% @ R Load

V. Backup Output Parameters

Nominal / Max. Apparent Power: 6KW (6,000W / 6,600VA); 12KW (12,000W / 13,200VA)

Max. AC Output Current: 41A for 6KW; 60A for 12KW

Peak Output Apparent Power: 200% @ 10s for both models

Nominal Voltage / Frequency: 220V/230V/240V, L+N+PE; 50Hz/60Hz

THDV: < 3% @ R Load

Transfer Time: < 10ms (Typical)

VI. Protection Features

Surge Protection: Type III

Protection Category: Class I

Standard Protections: Overcurrent protection, Overvoltage protection, AC short circuit protection, PV reverse polarity protection

Other Protections: Anti-islanding protection, PV switch; 12KW additionally supports optional AFCI 2.0 (Arc-Fault Circuit Interruption), 6KW not mentioned.

VII. General & Environmental Parameters

Parameter 6KW 12KW
Ingress Protection Degree IP66 IP66
Operating Temperature Range -25°C - 60°C -25°C - 60°C
Relative Humidity 0 - 100% 0 - 100%
Max. Operation Altitude 4,000m (>2,000m derating) 4,000m (>2,000m derating)
Cooling Method Smart Cooling Smart Cooling
Mounting Wall Bracket Wall Bracket
Dimensions (WHD) 367 * 421 * 215 mm 443 * 679 * 210 mm
Weight 11.5 kg (Lightweight) 31.1 kg

VIII. Display, Communication & Certifications

HMI: LED+LCD display, equipped with a 4.3-inch LCD color touchscreen

Communication Interfaces: RS485/CAN (BMS), RS485, CAN (parallel), 1DO, 1DI, Wi-Fi and LAN (Optional)

Charge/Discharge Management: Supports 6 time periods for battery charging/discharging settings

Certifications:

Safety: IEC/EN 62109-1/2

EMC: IEC/EN 61000-6-1/2/3/4, IEC/EN 62920

Grid: IEC 61727/62116, IEC 61683

Warranty: 5 Years

 

 

 
 

Product Advantages

 

 

1. IP66 high protection, suitable for indoor and outdoor installation
The unit is rated IP66, with an operating temperature range of -25°C–60°C and relative humidity of 0–100%. It can adapt to sheltered outdoor, courtyard, agricultural shed, humid, and large-temperature-difference installation environments, reducing installation location restrictions.

2. High PV oversizing ratio and multiple MPPTs for complex roofs
The 6K supports 200% usable PV power, with maximum usable PV power of 12kW, and adopts 2 MPPTs/2 strings, suitable for dual-orientation roofs and simple multi-string designs. The 12K supports 200% PV oversizing and 160% usable PV power, with maximum PV access of 24kW and usable power of 19.2kW, and adopts 3 MPPTs/6 strings, making it more suitable for multi-roof, multi-orientation, partially shaded, and large-area PV systems.

3. High battery charge/discharge current, supporting 48V lithium and lead-acid batteries
The 6K provides maximum charge/discharge current of 140A/140A, while the 12K provides 250A/250A, meeting fast charging/discharging and higher-power storage requirements. Both are compatible with lithium-ion and lead-acid batteries, suitable for different cost targets and existing battery systems.

4. 97%+ efficiency for lower long-term operating losses
The 6K achieves maximum efficiency of 97.3%, and the 12K achieves 97.6%, helping improve PV self-consumption and reduce energy losses in long-term residential and small commercial operation.

5. Fast backup transfer and strong short-term overload capability
Backup output peak capability is 200% @10s, with typical transfer time <10ms, capable of handling outage transfer and short-term startup surges from motors, water pumps, compressors, and similar loads. It is suitable for critical household loads and small commercial backup power.

6. Flexible parallel capability, supporting three-phase and on-grid/off-grid expansion
3 units can be paralleled to form a three-phase system, and up to 9 units can be paralleled for on-grid and off-grid operation, suitable for single-phase expansion, small three-phase loads, and gradually expanded energy storage projects.

7. Multi-energy input and strong system scalability
Supports generator, smart load, and AC coupling, enabling hybrid systems combining PV, battery, grid, and generator. It is also suitable for retrofitting existing grid-tied PV systems with battery storage.

8. Intelligent O&M and intuitive on-site operation
Equipped with a 4.3-inch LCD color touchscreen and 6 time periods for battery charging/discharging, facilitating peak-valley tariff strategy configuration. RS485/CAN BMS, parallel CAN, DI/DO, and optional Wi-Fi/LAN facilitate local commissioning and remote monitoring.

9. Safety protection and 5-year warranty
Includes overcurrent, overvoltage, AC short-circuit, PV reverse polarity, anti-islanding, and Type III surge protection; the 12K offers optional AFCI 2.0 DC arc-fault protection. The product comes with a 5-year warranty, suitable for long-term residential operation and small commercial projects.

 

 

 

Application Directions

 

18

Outdoor and harsh-environment residential energy storage

 

IP66, wide temperature range, and 0–100% humidity adaptability make it suitable for installation on villa exterior walls, courtyards, agricultural sheds, and in humid or large-temperature-difference areas. The 6K is lightweight and compact, suitable for wall mounting and single-person handling; the 12K is suitable for fixed outdoor installation in large homes.

Residential PV for multi-orientation and complex roofs

 

The 6K's 2 MPPTs are suitable for dual-orientation roofs; the 12K's 3 MPPTs/6 strings are suitable for large-home PV systems with multiple roofs, multiple orientations, and partial shading, improving string design flexibility.

19

 

 

451

Single-phase loads for large homes, villas, and small commercial sites

 

The 12K provides 12kW single-unit output, suitable for large homes, villas, small shops, clinics, offices, etc., and can support larger single-phase loads such as air conditioners, heat pumps, water pumps, and freezers; the 6K is suitable for ordinary residential use and medium loads.

Retrofitting existing PV systems with energy storage

 

AC coupling support makes it suitable for users with existing grid-tied PV inverters to add battery storage later, reducing modifications to the original PV system.

48

49

Small three-phase load projects

 

Three units in parallel can form a three-phase system, suitable for small three-phase water pumps, three-phase air conditioners, small processing equipment, etc., providing a solution for projects without a three-phase grid or requiring three-phase backup power.

Generator hybrid supply and smart load management

 

Supports generator connection and smart load control, suitable for weak grids, remote areas, farms, and small commercial sites. Through coordinated supply from PV, battery, and generator, it prioritizes critical loads.

17-31

 

Our Certificate

31

 

32

 

33

 

34

 

Regarding us

 

4

 

FY Solar - Full-Spectrum Solar & Energy Storage Partner | 10+ Years Factory Direct

Company Overview FY Solar is a vertically integrated solar energy and energy storage manufacturer with over 10 years of industry expertise. We own production lines for lithium batteries and solar panels under our proprietary brand, and serve as authorized distributors for select international brands - giving buyers access to the full solar value chain from a single, trusted source.

We specialize in serving distributors, wholesalers, solar installers, and EPC contractors who need competitive pricing, reliable supply, and professional technical support.


Manufacturing & Own Brand Two core product lines are manufactured in-house under our own brand:

Lithium Batteries: LiFePO4 chemistry, residential and commercial battery packs, scalable modular design for home, C&I, and off-grid applications. MOQ: 1 unit - the lowest barrier to entry for distributors testing new markets.

Solar Panels: Monocrystalline and bifacial modules, 100W–700W+. MOQ: 1 pallet (~20–31 panels depending on wattage) - ideal for small distributors and project-based procurement.

Factory-direct supply means: no middleman markup, direct quality control, and full OEM/ODM customization capability.

 

Global Exhibitions

 

15

Hot Tags: 12kw single-phase hybrid inverter, China 12kw single-phase hybrid inverter manufacturers, suppliers, factory, 30kw solar inverter, 8kw solar inverter, portable solar inverter, Single Phase Hybrid Solar Inverter, solar battery inverter, solar inverter with wifi

Send Inquiry