Single-phase Hybrid Inverter

Send Inquiry
Single-phase Hybrid Inverter
Details
The single-phase hybrid inverter serves as the "solar-storage-fossil fuel-grid" energy hub in single-phase residential and small commercial settings. Its core value lies in integrating photovoltaic power, batteries, the grid, and generators to achieve self-generation, energy storage for backup, and flexible power supply.
Category
Hybrid Solar Inverter
Share to
Description
 
 

Product Introduction

 

 

This series consists of single-phase hybrid inverters designed for residential and small commercial applications, covering three power ratings: 6.6 kW, 9.2 kW, and 11.2 kW, with corresponding maximum PV power of 12,000 W, 16,000 W, and 18,000 W. It can simultaneously connect to PV, batteries, and the grid/generator, enabling grid-tied, off-grid, and hybrid operation. It is suitable for home PV energy storage, backup power, and weak-grid/no-grid areas.

 

 

Main electrical features

 

 

  • Single-phase output: 220/230/240 VAC, pure sine wave output;
  • Maximum PV open-circuit voltage: 500 VDC;
  • MPPT operating voltage range: 120–450 VDC;
  • 2 MPPTs; maximum input current per MPPT by model: 2×21 A / 2×27 A / 2×34 A;
  • Rated grid-tied output current: approximately 26.25 A / 40 A / 48.7 A;
  • Maximum DC/AC conversion efficiency: 97%; battery-to-AC efficiency: 93%;
  • Nominal battery DC voltage: 48 VDC; maximum charge/discharge current by model: up to 135 A / 190 A / 210 A;
  • Supports parallel expansion;
  • Protection rating: IP65/IP66;
  • Communication interfaces: USB/RS232, WiFi, BMS RS485/CAN;
  • Supports dual GEN/AC inputs and automatic switching between generator and grid input.
 
 

Main Advantages

 

1. Safe and reliable, suitable for various environments

With IP65/IP66 waterproof and dustproof protection, it can adapt to relatively complex indoor and outdoor working environments. The wide operating temperature range makes it suitable for various climatic conditions.

2. Strong PV integration capability

The maximum PV power can reach 12–18kW. With 2 MPPTs and an MPPT range of 120–450VDC, it facilitates PV system design for different orientations and different strings, improving power generation utilization.

3. Hybrid operation and flexible system configuration

It supports grid-tied operation, off-grid/backup operation, battery charging and discharging, and generator connection. It is suitable for areas with unstable grids or no grid. The dual-input GEN/AC design can automatically switch between generator and utility grid, improving power supply continuity.

4. Smart load management

The dual-output design can be used for smart load management. Combined with timer and priority configuration, AC/PV outputs can be configured and managed to prioritize important loads.

5. Battery compatibility and communication-friendly design

A reserved BMS communication port (RS485, CAN-BUS, or RS232) facilitates communication with lithium battery BMS. The battery-independent design improves system configuration flexibility.

6. Easy maintenance

The replaceable fan design facilitates later maintenance and reduces O&M difficulty.

7. User-friendly experience

The selectable input voltage range is suitable for loads such as household appliances and personal computers. Pure sine wave output helps sensitive equipment operate stably.

8. Supports parallel operation for capacity expansion

Parallel operation is supported, making future capacity expansion easier or helping meet higher power demand.

 

 

Application Directions

 

17

Backup power in areas with unstable grids

 

In weak-grid areas with frequent outages, it can serve as a household backup power source to support critical loads such as lighting, refrigerators, network equipment, and computers.Together with PV and batteries, it can provide off-grid power for remote homes, farmhouses, and small sites. When necessary, a generator can also be connected as a supplement.

Small agriculture and workshops

 

Suitable for small farms, irrigation pumps, agricultural machinery repair shops, woodworking/metalworking workshops, etc. Such scenarios often involve single-phase motors, water pumps, power tools, and other inductive loads, where pure sine wave output and short-time overload capability are critical. With generator ATS control, power can be automatically supplemented when PV output is insufficient.

17-31

 

 

49

Light commercial off-grid and backup power

 

Suitable for remote shops, clinics, small guesthouses, small communication/surveillance sites, cold storage auxiliary power, etc. Dual AC output facilitates branch distribution, while Meter/CT and WiFi/4G monitoring facilitate energy consumption monitoring and remote O&M.

Residential rooftop PV energy storage systems

 

Suitable for single-phase residential rooftop PV plus battery storage. PV supplies loads and charges the battery during the day, and the battery supplies power at night or during outages, reducing electricity bills and increasing self-consumption.

18

4541

Smart load management scenarios

 

Through dual outputs and priority/timer configuration, important and non-important loads can be managed separately. For example, priority can be given to refrigerators, lighting, and communication equipment, while non-critical loads are cut off when necessary.

Backup power for small commercial shops

 

It can be used in single-phase load scenarios such as small shops, offices, and clinics, combining PV and batteries to achieve backup power and electricity cost optimization.

13

 

Our Certificate

31

 

32

 

33

 

34

 

Regarding us

 

4

 

FY Solar - Full-Spectrum Solar & Energy Storage Partner | 10+ Years Factory Direct

Company Overview FY Solar is a vertically integrated solar energy and energy storage manufacturer with over 10 years of industry expertise. We own production lines for lithium batteries and solar panels under our proprietary brand, and serve as authorized distributors for select international brands - giving buyers access to the full solar value chain from a single, trusted source.

We specialize in serving distributors, wholesalers, solar installers, and EPC contractors who need competitive pricing, reliable supply, and professional technical support.


Manufacturing & Own Brand Two core product lines are manufactured in-house under our own brand:

Lithium Batteries: LiFePO4 chemistry, residential and commercial battery packs, scalable modular design for home, C&I, and off-grid applications. MOQ: 1 unit - the lowest barrier to entry for distributors testing new markets.

Solar Panels: Monocrystalline and bifacial modules, 100W–700W+. MOQ: 1 pallet (~20–31 panels depending on wattage) - ideal for small distributors and project-based procurement.

Factory-direct supply means: no middleman markup, direct quality control, and full OEM/ODM customization capability.

 

Global Exhibitions

 

15

Hot Tags: single-phase hybrid inverter, China single-phase hybrid inverter manufacturers, suppliers, factory, 110v solar inverter, 3 Phase Hybrid Solar Inverter, 3kw solar inverter, high frequency solar inverter, portable solar inverter, solar inverter with remote monitoring

Send Inquiry